Harmony 890 USB Port Repair Service
If your Harmony 890's USB Port has detached, or if the internal pins have become damaged, we can replace the port for you. We use a brand-new port and, if any of the corner mounting pads on the PCB have been damaged, we reinforce the new port with epoxy to help ensure that the port will not detach again. We will also thoroughly test all of the other functions on your 890 including the IR emitters, all buttons, charging system and tilt-sensor. A full written evaluation and repair report is also included! Please note - if any of the delicate 'finger' pads on the board (the ones used to carry voltage and data) have been damaged (lifted, missing), jumper wires will be required. This additional soldering can add as much as $20 to the fee. Before we begin the repair, we will let you know if an up-charge is required and you will be given the option of a full refund if you decide not to get the USB port replaced.