Harmony 1100 2nd Generation LCD
SKU:
$55.00
$55.00 - $75.00
per item
This module includes the LCD and integrated touch screen. We have refurbished OEM modules (Tianma TM035KBZ17), that have a brand-new touch screen installed and we also have new, 100% compatible replacement modules (Tianma TM035KDH05). Note that the original KBZ17 is no longer manufactured and any that can still be found on the open market are typically not 'A-rated' , so we won't use them.
We have found a wide variation in the sensitivity of the digitizer (aka 'touch screen') that Logitech used with the 2nd generation 1100. The digitizer we use may be more (or less) sensitive than what you are used to and so, we recommend that you always 'tap' with the end of your finger as opposed to pressing with 'soft tissue' like the ball of your finger. You will find that the screen responds quickly and effortlessly. This will also extend the life of the digitizer and reduce the likelihood of resistive-layer failure or cracking the inner glass, both of which we have seen many times. Many customers don't realize that these resistive-type digitizers are best used with a stylus and we will provide one with your order. We recommend that the stylus be used at all times, but at a minimum, it should be used during the Calibration Routine, which must be done after the LCD installation. Please note: These modules are not compatible with the 1st Generation 1100 which uses the Foxconn PT035TN01 V6. Only order this LCD if you find the Tianma module in your H1100.
We have found a wide variation in the sensitivity of the digitizer (aka 'touch screen') that Logitech used with the 2nd generation 1100. The digitizer we use may be more (or less) sensitive than what you are used to and so, we recommend that you always 'tap' with the end of your finger as opposed to pressing with 'soft tissue' like the ball of your finger. You will find that the screen responds quickly and effortlessly. This will also extend the life of the digitizer and reduce the likelihood of resistive-layer failure or cracking the inner glass, both of which we have seen many times. Many customers don't realize that these resistive-type digitizers are best used with a stylus and we will provide one with your order. We recommend that the stylus be used at all times, but at a minimum, it should be used during the Calibration Routine, which must be done after the LCD installation. Please note: These modules are not compatible with the 1st Generation 1100 which uses the Foxconn PT035TN01 V6. Only order this LCD if you find the Tianma module in your H1100.
Out of stock