- Parts by Model
- Harmony One Parts
- Harmony One LCD (2nd Generation OEM)
Harmony One LCD (2nd Generation OEM)
If you prefer an OEM LCD instead of our replacement module, we do have some used Harmony One 2nd Generation LCD modules that have been pulled from otherwise defective units. They are in excellent condition with no pixel damage and the ribbon cable is in perfect condition with no burned or lifted pads. There may be some very light scuffs on the surface, but these are not visible when the module is installed. The LCD is only compatible with the 2nd Generation version of the hardware board (PCB version 7.4) and you will receive either the CT022TN15 or the TM022GDH11, both completely interchangeable. Before ordering this part please confirm that your Harmony One is compatible or contact us for guidance! As far as installation is concerned, in some ways it is easier than installing our replacement module, in that the mounting bracket is already attached to the back and does not need to be modified. This also ensures that the LCD is perfectly centered in the front cover display window. You will need a temperature-controlled soldering station to install this module and it is recommended to have prior SMD soldering experience. We will provide a small amount of ChipQuik desoldering alloy and a pry-tool to help with the installation, but you will need flux (tacky paste preferred) in order to activate and use the ChipQuik. If you are not comfortable with doing the installation, then you can always order the LCD Replacement Service instead! If you would like us to install an OEM LCD instead of our replacement LCD, simply let us know using the 'Note to Seller' option during checkout.